• World class optics and sensor systems

    Optics and sensor system for civil or defense

  • Specialised optics for defense

    Optics and sensors for police or military

  • Worldcalss medico equipment

    Worldclass medico equipment

  • Research and development

    We assist your engineering department with challenging projects

Fused Silica Window

Fused Silica Window are of high precision dimension control, minimal transmitted beam deviation, high surface quality.

With those excellent features, the high precision Fused silicon window is widely use in projection optics systems, imaging and optical measurement system.

For your wide range of applications, we can supply varieties of single layer or multiplayer anti-reflecting coating on optical windows.

Please refer to Coatings chapter for more information.

High Precision Fused Silica Window
Specifications:
Material UV grade fused silica
Diameter Tolerance +0.00/-0.05mm
Thickness Tolerance ±0.1mm
Clear Aperture >Central 85% of diameter
Surface Quality 20-10 S/D
Parallelism Refer to the table
Wavefront Distortion λ/10 per 25mm @632.8nm
Protective Bevel <0.25mm x 45°
Coating Uncoated
1 min Parallelism 10 sec Parallelism φ(mm) T(mm)
Part No. Part No.
WIN1201 10.0 6.0
WIN1202 12.7 6.0
WIN1203 25.0 6.0
WIN1204 25.4 6.0
WIN1205 30.0 6.0
WIN1206 50.0 10.0
Standard Fused Silica Window
Specifications:
Material UV grade fused silica
Diameter Tolerance +0.0/-0.1mm
Thickness Tolerance ±0.1mm
Clear Aperture >Central 85% of diameter
Surface Quality 60-40 S/D
Parallelism < 1 arc minute
Wavefront Distortion λ/4 per 25mm @632.8nm
Protective Bevel <0.25mm x 45°
Coating Uncoated
Part No. φ(mm) T(mm)
10.0 3.0
12.7 3.0
25.0 3.0
25.4 3.0
30.0 3.0
50.0 3.0

Note: Other sizes and coatings are available upon request.

Ultra Precision BK7 Window with λ/20 @632.8nm  and Optical Flat are also available upon request.

The general tolerance specifications above provide a guideline regarding manufacturing capabilities for optics ranging in size from 1-600mm.

The manufacturing limits are not absolute; tighter tolerances may be possible.

Part specific tolerances may vary depending on component size, shape, and/or material.

This website uses cookies. By continuing to use this site, you accept our use of cookies.  Learn more